Type Full Name :
Sign With Hand
Last Name
Location Where Activity will Occur
Organization Name
State
Permit Details
Certification
• Floor plans for permits that are applicable
• Fire Retardant Certificates for Decorative material. (if applicable)
• Purge Document for Vehicle Storage (if applicable)
• Fireworks Itinerary and details (if applicable)
Inspection Details
ZIP
Event Start Date and Time
Fee Schedule
Preferred Inspection Date and Time
State quantities for each category to be stored, or used and the method stored or used:
Address 2
First Name
Codes and Regulations
The fee for this application fee is:
Address Where Permit is Required
Applicant Details
Email
Application Fee
Permit Type (see description of types below)
Address 2
ZIP
The Uniform Fire Code states: "Permits shall be required, and obtained from the local enforcing agency for the activities specified in this section, except where they are an integral part of a process or activity by reason of which a use is required to be registered and regulated as a life hazard use. Permits shall at all times be kept in the premises designated therein and shall at times be subject to inspection by the fire official." [N.J.A.C. 5:70-2.7 (a)]

Type 1 permit - $54.00

  1. Tent Use ( Temporary/ Seasonal)
  2. Propane Use for outdoor cooking, food vending (Food Trucks)
  3. Bonfires
  4. The use of a torch or flame-producing device to remove paint from, or seal membrane roofs on, any building or structure;
  5. The occasional use of any non-residential occupancy other than Use Groups F, H or S for group overnight stays of persons over 2-1/2 years of age, in accordance with section F-709.0 of the Fire Prevention Code;
  6. Individual portable kiosks or displays when erected in a covered mall for a period of less than 90 days, and when not covered by a Type 2 permit;
  7. The use of any open flame or flame producing device, in connection with any public gathering, for purposes of entertainment, amusement, or recreation;
  8. Welding and cutting operations except where the welding and cutting is performed in areas approved for welding and is registered as a type B Life Hazard use;
  9. The possession or use of explosives or blasting agents, other than model rocketry engines regulated under N.J.A.C. 12:194;
  10. The use of any open flame, or flame-producing device in connection with the training of non-fire service personnel in fire suppression or extinguishment procedures;
  11. The occasional use in any building of a multipurpose room, with a maximum permitted occupancy of 100 or more for amusement, entertainment or mercan- tile type purposes.
  12. The storage or handling of class I flammable liquids in closed containers of aggregate amounts of more than 10 gallons, but not more than 660 gallons inside a building, or more than 60 gallons, but not more than 660 gallons outside a building.
  13. The storage or handling of class II or IIIA combustible liquids in closed containers of aggregate amounts of more than 25 gallons,, but not more than 660 gallons inside a building, or more than 60 gallons, but not more than 660 gallons outside a building.
  14. Any permanent cooking operation that requires a suppression system in accordance with N.J.A.C. 5:70-4.7(g) and is not defined as a life hazard use in accordance with N.J.A.C. 5:70-2.4.
  15. The use as a place of public assembly, for a total of not more than 15 days in a calendar year, of a building classified as a commercial farm building under the Uniform Construction Code.
Type 2 permit - $214.00
  1. Bowling lane resurfacing and bowling pin refinishing involving the use and application of flammable liquids or materials;
  2. Fumigation or thermal insecticide fogging;
  3. Carnivals and circuses employing mobile structure used for human occupancy;
  4. The use of a covered mall in any of the following manners:
    • Placing or constructing temporary kiosks, display booths, concession equipment or the like in more than 25 percent of the common area of the mall;
    • Temporarily using the mall as a place of assembly;
    • Using open flame or flame devices;
    • Displaying liquid or gas fuel powered equipment; or
    • Using liquefied petroleum gas, liquefied natural gas, or compressed flammable gas in containers exceeding five pound capacity;
  5. Storage outside of buildings of LP-gas cylinders or other compressed gas containers when part of a cylinder exchange program;
Type 3 permit - $427.00
  1. Industrial processing ovens or furnaces operating at approximately atmospheric pressures and temperatures not exceeding 1,400 degrees Fahrenheit which are heated with oil or gas fuel or which contain flammable vapors from the product being processed;
  2. Any wrecking yard or junkyard; or
  3. The storage or discharge of fireworks.
6. Type 4 permit - $641.00
  1. Storage or use at normal temperature and pressure or more than 2000 cubic feet of flammable compressed gas or 6000 cubic feet or non-flammable compressed gas;
  2.  The production or sale of cryogenic liquids; the storage or use of more than 10 gallons of liquid oxygen, flammable cryogenic liquids or cryogenic oxidizers; or the storage of more than 500 gallons of non-flammable; non- toxic, cryogenic liquids;
  3.  The storage, handling, and processing of flammable, combustible, and unstable liquids in closed containers and portable' tanks in aggregate amounts of more than 660 gallons;
  4. To store or handle (except medicines, beverages, foodstuffs, cosmetics other common consumer items, when packaged according to commonly accepted practices):
    1. More than 55 gallons of corrosive liquids;
    2. More than 500 pounds of oxidizing materials;
    3. More than 10 pounds of organic peroxides;
    4. More than 500 pounds of nitromethane;
    5. More than 1000 pounds of ammonium nitrate;
    6. More than one microcurie of radium not contained in a sealed source;
    7. More then one millicurie of radium or other radiation material in a sealed source or sources;
    8. Any amount of radioactive material for which the specific license from the Nuclear Regulatory Commission is required; or
    9. More than 10 pounds of flammable solids
  5. The melting, casting, heating, treating, machining or grinding of more than 10 pounds of magnesium per working day

Type 5 permit - $1,380.00

  1. Reserved
Signature
City
Name of Event
The above named applicant hereby requests permission to conduct the following activity at the above indicated location:
By signing below, I the owner certify that all of the information provided in this application is true and accurate.
Phone #
{[PNAME]}
Phone #
Event End Date and Time
Permit Type Fee
Type 1 $54.00
Type 2 $214.00
Type 3 $427.00
Type 4 $641.00
Type 5 $1,380.00
{[ADDR]}
{[CITY]}, {[STATE]} {[ZIP]}
{[APHONE]}
{[AWEBSITE]}
Property Name
Required Attachments
NOTE: You are required to provide a date and time for inspection on this permit. You must also be ready for inspection at the time given, if not a $75.00 Re-Inspection fee will issued. Failure to request a proper fire safety inspection will lead to the issuance of a fire code penalty and refusal by the Fire Official to issue future permits to your company. Also, please include the Occupancy Load of the Room Event is to be held. Please select your preferred start and completion date and time below.

Special event permit applications shall be filed five days prior to the event for the Fire Official's approval. Late applications may be approved by the Fire Official but shall be subject to an additional fee of $200 for processing. The applicant shall include the date and time of final inspection on the permit application. Special event inspections required at other than normal working hours may be subject to the additional charges for the Fire Marshal's overtime rate of pay. Additional reinspection fees may apply if the event is not ready for final inspection on the date and time designated by the applicant.

And for the keeping, storage, occupancy, sale, handling or manufacture of the following:
Address
City
State